Millermatic® 211 MIG Welder with Running Gear/Cylinder Rack
Regular price:
$2,857.53
Content:
1 EA
Product number:
9003
Product information "Millermatic® 211 MIG Welder with Running Gear/Cylinder Rack"
Welds material from 24-gauge to 3/8 in thick in a single pass. Uses 120V or 240V power.
Features
- Auto Spool Gun Detect™: Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
- Multi-voltage plug (MVP™): Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord.
- Quick Select™ Drive Roll: Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
- Generator Compatible: Will be able to operate and provide full output when powered by an engine-driven welder with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer. Limited output will occur when used with smaller generators.
- Smooth-Start™: This technology provides a smooth, spatter-free start. No more pop-gun starts or spatter to clean up.
- Inverter Technology: Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
- Fan-On-Demand™: Power source cooling system operates only when needed, reducing noise, energy use, and the amount of contaminants pulled through machine.
- Angled Drive System with Quick Select™ Drive Roll: Robust, angled wire drive with Quick Select™ drive roll. The Quick Select drive roll offers three grooves- two for different size solid wire and a third for flux-cored wire.
- Advanced Auto-Set™: Advanced Auto-Set™ now includes five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile.
Specifications
- Wire Feed Speed Display: 1.5 m/min - 15.2 m/min; 60 IPM - 600 IPM
- Series: Millermatic®
- Current Type: DC
- Input Hz: 50/60 Hz
- Rated Output: 150 A at 21.5 VDC, 40% duty cycle (240V),115 A at 19.8 VDC, 20% duty cycle (120V)
- Spool Size: 8 in (203 mm)
- Material Type: Aluminum;Solid Steel;Flux Cored;Stainless
- Display Max Thickness - Mild Steel: 3/8 in.
- Height: 12.5 EA
- Weld Output: CV
- Display Min Thickness - Aluminum: 18 ga
- Width: 11.25 EA
- Input Voltage: 110/115/120 V;220/230/240 V
- Amperage Range: 30 A - 230 A
- Display Min Thickness - Mild Steel: 24 ga.
- Amperage Min: 30 A
- Length: 20.5 EA
- Wire Diameter Display: Stainless 0.024 in. - 0.035 in.;Stainless 0.6 mm. - 0.9 mm.;Solid Steel 0.6 mm. - 0.9 mm.;Solid Steel 0.024 in. - 0.035 in.;Flux Cored 0.03 in. - 0.045 in.;Flux Cored 0.8 mm. - 1.2 mm.
- Min Wire Feed Speed: 1.5 mmin
- Input Phase: 1-Phase
- Max Wire Feed Speed: 15.2 mmin
- Display Max Thickness - Aluminum: 3/8 in.
- Material Thickness Display: Aluminum 18 ga. (1.2 mm) - 3/8 in. (9.5 mm);Mild Steel 24 ga. (0.5 mm) - 3/8 in. (9.5 mm)
- Max Open Circuit Voltage: 54 VDC
- Weight: 38 EA
- Amperage Max: 230 A
- Weldable Metals: Aluminum;Stainless Steel;Steel
- Country of Origin: United States
Downloads
Spec SheetLogin
No reviews found. Share your insights with others.